DCA-M mobile mechanical fume extraction solution is designed for capturing and purification of air contaminated by soldering, tin-plating, laser engraving and marking, resistance and arc welding processes, and also by dry, unsticking, nonfibrous dust of low concentration.
Filters have three stages of filtration:
— preliminary filter of galvanized multilayer notched net (washable)
— HEPA H13 GOST R EN 1822 fine filter (accumulative, non-regenerable)
— activated carbon filter (non-regenerable)
Fumes and aerosols are captured by BEA extraction arms, which are to be ordered separately, depending on required reach radius and lighting option.
Intended operators
• Industrial enterprises
• Laboratories
• Engineering workshops
• Educational facilities
Rate of working recommendations
• for semiautomatic welding in an atmosphere of shielding gas – expenditure of welding wire up to 30 kg per month
• for manual arc welding – expenditure of welding wire up to 15 kg per month
For more intensive applications self-cleaning DCSC-M-5 and DCSC-M-6 are recommended.
• Compact size and light weight
• Robust metal case
• Big casters (two of which are with brakes) for uneven floors
• Light indication of cartridge critical dirtiness
• Activated carbon filter for removal of toxic gases and scents in standard trim
• Washable preliminary filter for main cartridge protection from sparks and large dust particles
• 230 and 400 V variants
Composition and operation principle
2. filter module frame;
3. fan frame;
4. outlet grill;
5. carbon filter;
6. rotating caster with brake;
8. door;
9. HEPA (МК-005) cartridge;
10. preliminary filter;
11. control panel.
1. Air-dust flow is sucked through extraction arm be a fan. Contaminated contours protective screen and preliminary filter (item 10), which evenly distributes the flow and protects cartridge (item 9) by capturing large particles.
Air goes through cartridge filtering material, leaving small contaminants on its surface. Cleaned air then leaves filter through through outlet grill.
2. With time dust layer on cartridge surface grows and resistance to airflow get bigger, which indicated necessity of cartridge replacement.
IMPORTANT! Extraction arm is to be ordered separately.
OTHER PRODUCTS
